Bacterial efflux pumps excrete SYTO™ dyes and lead to false-negative staining results.

Multidrug efflux pumps excrete a range of small molecules from bacterial cells. In this study, we show that bacterial efflux pumps have affinity for a range of SYTO™ dyes that are commonly used to label bacteria. Efflux pump activity will there lead to false negative results from bacterial staining and SYTO™ dyes should be used with caution on live samples.

Efficacy of rifampicin combination therapy against MRSA prosthetic vascular graft infections in a rat model.

Staphylococcus aureus is a major cause of prosthetic vascular graft or endograft infections (VGEIs) and the optimal choice of antibiotics is unclear. We investigated various antibiotic choices as either monotherapy or combination therapy with rifampicin against MRSA in vitro and in vivo. Fosfomycin, daptomycin and vancomycin alone or in combination with rifampicin was used against MRSA USA300 FPR3757. Each antibiotic was tested for synergism or antagonism with rifampicin in vitro, and all antibiotic regimens were tested against actively growing bacteria in media and non-growing bacteria in buffer, both as planktonic cells and in biofilms. A rat model of VGEI was used to quantify the therapeutic efficacy of antibiotics in vivo by measuring bacterial load on grafts and in spleen, liver and kidneys. In vitro, rifampicin combinations did not reveal any synergism or antagonism in relation to growth inhibition. However, quantification of bactericidal activity revealed a strong antagonistic effect, both on biofilms and planktonic cells. This effect was only observed when treating active bacteria, as all antibiotics had little or no effect on inactive cells. Only daptomycin showed some biocidal activity against inactive cells. In vivo evaluation of therapy against VGEI contrasted the in vitro results. Rifampicin significantly increased the efficacy of both daptomycin and vancomycin. The combination of daptomycin and rifampicin was by far the most effective, curing 8 of 13 infected animals. Our study demonstrates that daptomycin in combination with rifampicin shows promising potential against VGEI caused by MRSA. Furthermore, we show how in vitro evaluation of antibiotic combinations in laboratory media does not predict their therapeutic effect against VGEI in vivo, presumably due to a difference in the metabolic state of the bacteria.

Combined pH ratiometry and fluorescence lectin-binding analysis (pH-FLBA) for microscopy-based analyses of biofilm pH and matrix carbohydrates.

Bacterial biofilms have a complex and heterogeneous three-dimensional architecture that is characterized by chemically and structurally distinct microenvironments. Confocal microscopy-based pH ratiometry and fluorescence lectin-binding analysis (FLBA) are well-established methods to characterize pH developments and the carbohydrate matrix architecture of biofilms at the microscale. Here, we developed a combined analysis, pH-FLBA, to concomitantly map biofilm pH and the distribution of matrix carbohydrates in bacterial biofilms while preserving the biofilm microarchitecture. As a proof of principle, the relationship between pH and the presence of galactose- and fucose-containing matrix components was investigated in dental biofilms grown with and without sucrose. The pH response to a sucrose challenge was monitored in different areas at the biofilm base using the ratiometric pH-sensitive dye C-SNARF-4. Thereafter, the fucose- and galactose-specific fluorescently labeled lectins Aleuria aurantia lectin (AAL) and Morus nigra agglutinin G (MNA-G) were used to visualize carbohydrate matrix components in the same biofilm areas and their immediate surroundings. Sucrose during growth significantly decreased biofilm pH (P < 0.05) and increased the amounts of both MNA-G- and AAL-targeted matrix carbohydrates (P < 0.05). Moreover, it modulated the biofilm composition towards a less diverse community dominated by streptococci, as determined by 16S rRNA gene sequencing. Altogether, these results suggest that the production of galactose- and fucose-containing matrix carbohydrates is related to streptococcal metabolism and, thereby, pH profiles in dental biofilms. In conclusion, pH-FLBA using lectins with different carbohydrate specificities is a useful method to investigate the association between biofilm pH and the complex carbohydrate architecture of bacterial biofilms.IMPORTANCEBiofilm pH is a key regulating factor in several biological and biochemical processes in environmental, industrial, and medical biofilms. At the microscale, microbial biofilms are characterized by steep pH gradients and an extracellular matrix rich in carbohydrate components with diffusion-modifying properties that contribute to bacterial acid-base metabolism. Here, we propose a combined analysis of pH ratiometry and fluorescence lectin-binding analysis, pH-FLBA, to concomitantly investigate the matrix architecture and pH developments in microbial biofilms, using complex saliva-derived biofilms as an example. Spatiotemporal changes in biofilm pH are monitored non-invasively over time by pH ratiometry, while FLBA with lectins of different carbohydrate specificities allows mapping the distribution of multiple relevant matrix components in the same biofilm areas. As the biofilm structure is preserved, pH-FLBA can be used to investigate the in situ relationship between the biofilm matrix architecture and biofilm pH in complex multispecies biofilms.

Extracellular G-quadruplexes and Z-DNA protect biofilms from DNase I, and G-quadruplexes form a DNAzyme with peroxidase activity.

Many bacteria form biofilms to protect themselves from predators or stressful environmental conditions. In the biofilm, bacteria are embedded in a protective extracellular matrix composed of polysaccharides, proteins and extracellular DNA (eDNA). eDNA most often is released from lysed bacteria or host mammalian cells, and it is the only matrix component most biofilms appear to have in common. However, little is known about the form DNA takes in the extracellular space, and how different non-canonical DNA structures such as Z-DNA or G-quadruplexes might contribute to its function in the biofilm. The aim of this study was to determine if non-canonical DNA structures form in eDNA-rich staphylococcal biofilms, and if these structures protect the biofilm from degradation by nucleases. We grew Staphylococcus epidermidis biofilms in laboratory media supplemented with hemin and NaCl to stabilize secondary DNA structures and visualized their location by immunolabelling and fluorescence microscopy. We furthermore visualized the macroscopic biofilm structure by optical coherence tomography. We developed assays to quantify degradation of Z-DNA and G-quadruplex DNA oligos by different nucleases, and subsequently investigated how these enzymes affected eDNA in the biofilms. Z-DNA and G-quadruplex DNA were abundant in the biofilm matrix, and were often present in a web-like structures. In vitro, the structures did not form in the absence of NaCl or mechanical shaking during biofilm growth, or in bacterial strains deficient in eDNA or exopolysaccharide production. We thus infer that eDNA and polysaccharides interact, leading to non-canonical DNA structures under mechanical stress when stabilized by salt. We also confirmed that G-quadruplex DNA and Z-DNA was present in biofilms from infected implants in a murine implant-associated osteomyelitis model. Mammalian DNase I lacked activity against Z-DNA and G-quadruplex DNA, while Micrococcal nuclease could degrade G-quadruplex DNA and S1 Aspergillus nuclease could degrade Z-DNA. Micrococcal nuclease, which originates from Staphylococcus aureus, may thus be key for dispersal of biofilm in staphylococci. In addition to its structural role, we show for the first time that the eDNA in biofilms forms a DNAzyme with peroxidase-like activity in the presence of hemin. While peroxidases are part of host defenses against pathogens, we now show that biofilms can possess intrinsic peroxidase activity in the extracellular matrix.

Considerations on the use of microsensors to profile dissolved H2 concentrations in microbial electrochemical reactors.

Measuring the distribution and dynamics of H2 in microbial electrochemical reactors is valuable to gain insights into the processes behind novel bioelectrochemical technologies, such as microbial electrosynthesis. Here, a microsensor method to measure and profile dissolved H2 concentrations in standard H-cell reactors is described. Graphite cathodes were oriented horizontally to enable the use of a motorized microprofiling system and a stereomicroscope was used to place the H2 microsensor precisely on the cathode surface. Profiling was performed towards the gas-liquid interface, while preserving the electric connections and flushing the headspace (to maintain anoxic conditions) and under strict temperature control (to overcome the temperature sensitivity of the microsensors). This method was tested by profiling six reactors, with and without inoculation of the acetogen Sporomusa ovata, at three different time points. H2 accumulated over time in the abiotic controls, while S. ovata maintained low H2 concentrations throughout the liquid phase (< 4 µM) during the whole experimental period. These results demonstrate that this setup generated insightful H2 profiles. However, various limitations of this microsensor method were identified, as headspace flushing lowered the dissolved H2 concentrations over time. Moreover, microsensors can likely not accurately measure H2 in the immediate vicinity of the solid cathode, because the solids cathode surface obstructs H2 diffusion into the microsensor. Finally, the reactors had to be discarded after microsensor profiling. Interested users should bear these considerations in mind when applying microsensors to characterize microbial electrochemical reactors.

The Effect of Enzymatic Treatment with Mutanase, Beta-Glucanase, and DNase on a Saliva-Derived Biofilm Model.

INTRODUCTION: The dental biofilm matrix is an important determinant of virulence for caries development and comprises a variety of extracellular polymeric substances that contribute to biofilm stability. Enzymes that break down matrix components may be a promising approach to caries control, and in light of the compositional complexity of the dental biofilm matrix, treatment with multiple enzymes may enhance the reduction of biofilm formation compared to single enzyme therapy. The present study investigated the effect of the three matrix-degrading enzymes mutanase, beta-glucanase, and DNase, applied separately or in combinations, on biofilm prevention and removal in a saliva-derived in vitro-grown model. METHODS: Biofilms were treated during growth to assess biofilm prevention or after 24 h of growth to assess biofilm removal by the enzymes. Biofilms were quantified by crystal violet staining and impedance-based real-time cell analysis, and the biofilm structure was visualized by confocal microscopy and staining of extracellular DNA (eDNA) and polysaccharides. RESULTS: The in vitro model was dominated by Streptococcus spp., as determined by 16S rRNA gene amplicon sequencing. All tested enzymes and combinations had a significant effect on biofilm prevention, with reductions of >90% for mutanase and all combinations including mutanase. Combined application of DNase and beta-glucanase resulted in an additive effect (81.0% ± 1.3% SD vs. 36.9% ± 21.9% SD and 48.2% ± 14.9% SD). For biofilm removal, significant reductions of up to 73.2% ± 5.5% SD were achieved for combinations including mutanase, whereas treatment with DNase had no effect. Glucans, but not eDNA decreased in abundance upon treatment with all three enzymes. CONCLUSION: Multi-enzyme treatment is a promising approach to dental biofilm control that needs to be validated in more diverse biofilms.

A New Device for In Situ Dental Biofilm Collection Additively Manufactured by Direct Metal Laser Sintering and Vat Photopolymerization.

Dental biofilms are complex medical biofilms that cause caries, the most prevalent disease of humankind. They are typically collected using handcrafted intraoral devices with mounted carriers for biofilm growth. As the geometry of handcrafted devices is not standardized, the shear forces acting on the biofilms and the access to salivary nutrients differ between carriers. The resulting variability in biofilm growth renders the comparison of different treatment modalities difficult. The aim of the present work was to design and validate an additively manufactured intraoral device with a dental bar produced by direct metal laser sintering and vat photopolymerized inserts with standardized geometry for the mounting of biofilm carriers. Additive manufacturing reduced the production time and cost, guaranteed an accurate fit of the devices and facilitated the handling of carriers without disturbing the biofilm. Biofilm growth was robust, with increasing thickness over time and moderate inter- and intraindividual variation (coefficients of variance 0.48-0.87). The biofilms showed the typical architecture and composition of dental biofilms, as evidenced by confocal microscopy and 16S rRNA gene sequencing. Deeper inserts offering increased protection from shear tended to increase the biofilm thickness, whereas prolonged exposure to sucrose during growth increased the biofilm volume but not the thickness. Ratiometric pH imaging revealed considerable pH variation between participants and also inside single biofilms. Intraoral devices for biofilm collection constitute a new application for medical additive manufacturing and offer the best possible basis for studying the influence of different treatment modalities on biofilm growth, composition, and virulence. The Clinical Trial Registration number is: 1-10-72-193-20.

GFP fusions of Sec-routed extracellular proteins in Staphylococcus aureus reveal surface-associated coagulase in biofilms.

Staphylococcus aureus is a major human pathogen that utilises many surface-associated and secreted proteins to form biofilms and cause disease. However, our understanding of these processes is limited by challenges of using fluorescent protein reporters in their native environment, because they must be exported and fold correctly to become fluorescent. Here, we demonstrate the feasibility of using the monomeric superfolder GFP (msfGFP) exported from S. aureus. By fusing msfGFP to signal peptides for the Secretory (Sec) and Twin Arginine Translocation (Tat) pathways, the two major secretion pathways in S. aureus, we quantified msfGFP fluorescence in bacterial cultures and cell-free supernatant from the cultures. When fused to a Tat signal peptide, we detected msfGFP fluorescence inside but not outside bacterial cells, indicating a failure to export msfGFP. However, when fused to a Sec signal peptide, msfGFP fluorescence was present outside cells, indicating successful export of the msfGFP in the unfolded state, followed by extracellular folding and maturation to the photoactive state. We applied this strategy to study coagulase (Coa), a secreted protein and a major contributor to the formation of a fibrin network in S. aureus biofilms that protects bacteria from the host immune system and increases attachment to host surfaces. We confirmed that a genomically integrated C-terminal fusion of Coa to msfGFP does not impair the activity of Coa or its localisation within the biofilm matrix. Our findings demonstrate that msfGFP is a good candidate fluorescent reporter to consider when studying proteins secreted by the Sec pathway in S. aureus.

Protein ligand and nanotopography separately drive the phenotype of mouse embryonic stem cells.

Biochemical and biomechanical signals regulate stem cell function in the niche environments in vivo. Current in vitro culture of mouse embryonic stem cells (mESC) uses laminin (LN-511) to provide mimetic biochemical signaling (LN-521 for human systems) to maintain stemness. Alternative approaches propose topographical cues to provide biomechanical cues, however combined biochemical and topographic cues may better mimic the in vivo environment, but are largely unexplored for in vitro stem cell expansion. In this study, we directly compare in vitro signals from LN-511 and/or topographic cues to maintain stemness, using systematically-varied submicron pillar patterns or flat surfaces with or without preadsorbed LN-511. The adhesion of cells, colony formation, expression of the pluripotency marker,octamer-binding transcription factor 4 (Oct4), and transcriptome profiling were characterized. We observed that either biochemical or topographic signals could maintain stemness of mESCs in feeder-free conditions, indicated by high-level Oct4 and gene profiling by RNAseq. The combination of LN-511 with nanotopography reduced colony growth, while maintaining stemness markers, shifted the cellular phenotype indicating that the integration of biochemical and topographic signals is antagonistic. Overall, significantly faster (up to 2.5 times) colony growth was observed at nanotopographies without LN-511, suggesting for improved ESC expansion.

Polymyxin B complexation enhances the antimicrobial potential of graphene oxide.

Introduction: The antibacterial activity of graphene oxide (GO) has been widely explored and tested against various pathogenic bacterial strains. Although antimicrobial activity of GO against planktonic bacterial cells was demonstrated, its bacteriostatic and bactericidal effect alone is not sufficient to damage sedentary and well protected bacterial cells inside biofilms. Thus, to be utilized as an effective antibacterial agent, it is necessary to improve the antibacterial activity of GO either by integration with other nanomaterials or by attachment of antimicrobial agents. In this study, antimicrobial peptide polymyxin B (PMB) was adsorbed onto the surface of pristine GO and GO functionalized with triethylene glycol. Methods: The antibacterial effects of the resulting materials were examined by evaluating minimum inhibitory concentration, minimum bactericidal concentration, time kill assay, live/dead viability staining and scanning electron microscopy. Results and discussion: PMB adsorption significantly enhanced the bacteriostatic and bactericidal activity of GO against both planktonic cells and bacterial cells in biofilms. Furthermore, the coatings of PMB-adsorbed GO applied to catheter tubes strongly mitigated biofilm formation, by preventing bacterial adhesion and killing the bacterial cells that managed to attach. The presented results suggest that antibacterial peptide absorption can significantly enhance the antibacterial activity of GO and the resulting material can be effectively used not only against planktonic bacteria but also against infectious biofilms.

Fibrinolytic and antibiotic treatment of prosthetic vascular graft infections in a novel rat model.

OBJECTIVES: We developed a rat model of prosthetic vascular graft infection to assess, whether the fibrinolytic tissue plasminogen activator (tPA) could increase the efficacy of antibiotic therapy. MATERIALS AND METHODS: Rats were implanted a polyethylene graft in the common carotid artery, pre-inoculated with approx. 6 log10 colony forming units (CFU) of methicillin resistant Staphylococcus aureus. Ten days after surgery, rats were randomized to either: 0.9% NaCl (n = 8), vancomycin (n = 8), vancomycin + tPA (n = 8), vancomycin + rifampicin (n = 18) or vancomycin + rifampicin + tPA (n = 18). Treatment duration was seven days. Approximately 36 hours after the end of treatment, the rats were euthanized, and grafts and organs were harvested for CFU enumeration. RESULTS: All animals in the control group had significantly higher CFU at the time of euthanization compared to bacterial load found on the grafts prior to inoculation (6.45 vs. 4.36 mean log10 CFU/mL, p = 0.0011), and both the procedure and infection were well tolerated. Vancomycin and rifampicin treatment were superior to monotherapy with vancomycin, as it lead to a marked decrease in median bacterial load on the grafts (3.50 vs. 6.56 log10 CFU/mL, p = 0.0016). The addition of tPA to vancomycin and rifampicin combination treatment did not show a further decrease in bacterial load (4.078 vs. 3.50 log10 CFU/mL, p = 0.26). The cure rate was 16% in the vancomycin + rifampicin group vs. 37.5% cure rate in the vancomycin + rifampicin + tPA group. Whilst interesting, this trend was not significant at our sample size (p = 0.24). CONCLUSION: We developed the first functional model of an arterial prosthetic vascular graft infection in rats. Antibiotic combination therapy with vancomycin and rifampicin was superior to vancomycin monotherapy, and the addition of tPA did not significantly reduce bacterial load, nor significantly increase cure rate.

Polyether Ionophore Antibiotics Target Drug-Resistant Clinical Isolates, Persister Cells, and Biofilms.

Polyether ionophores are complex natural products known to transport various cations across biological membranes. While several members of this family are used in agriculture (e.g., as anti-coccidiostats) and have potent antibacterial activity, they are not currently being pursued as antibiotics for human use. Polyether ionophores are typically grouped as having similar functions, despite the fact that they significantly differ in structure; for this reason, how their structure and activity are related remains unclear. To determine whether certain members of the family constitute particularly interesting springboards for in-depth investigations and future synthetic optimization, we conducted a systematic comparative study of eight different polyether ionophores for their potential as antibiotics. This includes clinical isolates from bloodstream infections and studies of the compounds' effects on bacterial biofilms and persister cells. We uncover distinct differences within the compound class and identify the compounds lasalocid, calcimycin, and nanchangmycin as having particularly interesting activity profiles for further development. IMPORTANCE Polyether ionophores are complex natural products used in agriculture as anti-coccidiostats in poultry and as growth promoters in cattle, although their precise mechanism is not understood. They are widely regarded as antimicrobials against Gram-positive bacteria and protozoa, but fear of toxicity has so far prevented their use in humans. We show that ionophores generally have very different effects on Staphylococcus aureus, both in standard assays and in more complex systems such as bacterial biofilms and persister cell populations. This will allow us to focus on the most interesting compounds for future in-depth investigations and synthetic optimizations.

Antibody-Drug Conjugates to Treat Bacterial Biofilms via Targeting and Extracellular Drug Release.

The treatment of implant-associated bacterial infections and biofilms is an urgent medical need and a grand challenge because biofilms protect bacteria from the immune system and harbor antibiotic-tolerant persister cells. This need is addressed herein through an engineering of antibody-drug conjugates (ADCs) that contain an anti-neoplastic drug mitomycin C, which is also a potent antimicrobial against biofilms. The ADCs designed herein release the conjugated drug without cell entry, via a novel mechanism of drug release which likely involves an interaction of ADC with the thiols on the bacterial cell surface. ADCs targeted toward bacteria are superior by the afforded antimicrobial effects compared to the non-specific counterpart, in suspension and within biofilms, in vitro, and in an implant-associated murine osteomyelitis model in vivo. The results are important in developing ADC for a new area of application with a significant translational potential, and in addressing an urgent medical need of designing a treatment of bacterial biofilms.

Biofilm formation and inflammatory potential of Staphylococcus saccharolyticus: A possible cause of orthopedic implant-associated infections.

Staphylococcus saccharolyticus, a coagulase-negative staphylococcal species, has some unusual characteristics for human-associated staphylococci, such as slow growth and its preference for anoxic culture conditions. This species is a relatively abundant member of the human skin microbiota, but its microbiological properties, as well as the pathogenic potential, have scarcely been investigated so far, despite being occasionally isolated from different types of infections including orthopedic implant-associated infections. Here, we investigated the growth and biofilm properties of clinical isolates of S. saccharolyticus and determined host cell responses. Growth assessments in anoxic and oxic conditions revealed strain-dependent outcomes, as some strains can also grow aerobically. All tested strains of S. saccharolyticus were able to form biofilm in a microtiter plate assay. Strain-dependent differences were determined by optical coherence tomography, revealing that medium supplementation with glucose and sodium chloride enhanced biofilm formation. Visualization of the biofilm by confocal laser scanning microscopy revealed the role of extracellular DNA in the biofilm structure. In addition to attached biofilms, S. saccharolyticus also formed bacterial aggregates at an early stage of growth. Transcriptome analysis of biofilm-grown versus planktonic cells revealed a set of upregulated genes in biofilm-embedded cells, including factors involved in adhesion, colonization, and competition such as epidermin, type I toxin-antitoxin system, and phenol-soluble modulins (beta and epsilon). To investigate consequences for the host after encountering S. saccharolyticus, cytokine profiling and host cell viability were assessed by infection experiments with differentiated THP-1 cells. The microorganism strongly triggered the secretion of the tested pro-inflammatory cyto- and chemokines IL-6, IL-8, and TNF-alpha, determined at 24 h post-infection. S. saccharolyticus was less cytotoxic than Staphylococcus aureus. Taken together, the results indicate that S. saccharolyticus has substantial pathogenic potential. Thus, it can be a potential cause of orthopedic implant-associated infections and other types of deep-seated infections.

JMM Profile: Staphylococcus epidermidis.

Staphylococcus epidermidis is the most abundant commensal bacterium of human skin. Despite protecting us from foreign invaders, S. epidermidis itself exploits human vulnerability when given the opportunity. Such opportunities arise when patients are immunocompromised or when biomedical implants present an opportunity to colonize the surface and form biofilms. S. epidermidis is one of the most frequently isolated organisms from implanted devices and from bloodstream infections. However, S. epidermidis infections are often recalcitrant to antibiotics because of biofilm-associated antibiotic tolerance. Furthermore, the emergence and spread of nearly pan-resistant strains is a considerable health concern. Symptoms can be subclinical, making diagnosis challenging, and treatment with antibiotics is inefficient. For now, infection prevention remains the best strategy available.

Sexual Health During COVID-19: A Scoping Review.

INTRODUCTION: The COVID-19 pandemic impacted profoundly on the wellbeing and social interactions of the world population, and all dimensions of sexual health were potentially affected by globally implemented preventive measures. OBJECTIVES: The scoping review aimed to compile existing research investigating possible effects of COVID-19 lockdowns on adult sexual health, that is, sexual behavior, functioning, and satisfaction. Further, studies on the interplay between mental health and sexual well-being during the pandemic were reviewed. METHODS: The review was conducted in accordance with guidelines established by the Joanna Briggs Institute and the Extension for Scoping Reviews (PRISMA-ScR) Checklist. On October 11-12, 2021, PubMed, Embase, PsycInfo, Cinahl, Cochrane, Sociological Abstracts and Scopus were systematically searched for relevant peer-reviewed papers employing quantitative methodology. Additionally, unpublished ("grey") research studies on the subject were retrieved. The screening, data extraction, and analysis of evidence were conducted by 4 independent reviewers using an iterative approach. RESULTS: Based on 107 studies included, the scoping review showed that the pandemic had had a wide impact on all dimensions of sexual health. Except for solo sex activities, mainly negative COVID-19 implications were identified, although findings were, in sum, characterized by complexity and unpredictability. Thus, sexual behavior, functioning, and satisfaction during the pandemic appeared to be mitigated by a broad range of sociodemographic and contextual factors. Finally, sexual health seemed deeply entwined with overall mental health. CONCLUSION: The scoping review revealed a broad range of COVID-19-related effects on sexual health, including an overall decline in partnered sex and a concurrent increase in solo sex activities. It also emphasized a need for future research to shed light on possible long-term consequences of the pandemic in various population groups and on all aspects of sexual health. Toldam NE, Graugaard C, Meyer R, et al. Sexual Health During COVID-19: A Scoping Review. Sex Med Rev 2022;10:714-753.

The Role of Nanoscale Distribution of Fibronectin in the Adhesion of Staphylococcus aureus Studied by Protein Patterning and DNA-PAINT.

Staphylococcus aureus is a widespread and highly virulent pathogen that can cause superficial and invasive infections. Interactions between S. aureus surface receptors and the extracellular matrix protein fibronectin mediate the bacterial invasion of host cells and is implicated in the colonization of medical implant surfaces. In this study, we investigate the role of distribution of both fibronectin and cellular receptors on the adhesion of S. aureus to interfaces as a model for primary adhesion at tissue interfaces or biomaterials. We present fibronectin in patches of systematically varied size (100-1000 nm) in a background of protein and bacteria rejecting chemistry based on PLL-g-PEG and studied S. aureus adhesion under flow. We developed a single molecule imaging assay for localizing fibronectin binding receptors on the surface of S. aureus via the super-resolution DNA points accumulation for imaging in nanoscale topography (DNA-PAINT) technique. Our results indicate that S. aureus adhesion to fibronectin biointerfaces is regulated by the size of available ligand patterns, with an adhesion threshold of 300 nm and larger. DNA-PAINT was used to visualize fibronectin binding receptor organization in situ at ∼7 nm localization precision and with a surface density of 38-46 µm-2, revealing that the engagement of two or more receptors is required for strong S. aureus adhesion to fibronectin biointerfaces.

The giant staphylococcal protein Embp facilitates colonization of surfaces through Velcro-like attachment to fibrillated fibronectin.

Staphylococcus epidermidis causes some of the most hard-to-treat clinical infections by forming biofilms: Multicellular communities of bacteria encased in a protective matrix, supporting immune evasion and tolerance against antibiotics. Biofilms occur most commonly on medical implants, and a key event in implant colonization is the robust adherence to the surface, facilitated by interactions between bacterial surface proteins and host matrix components. S. epidermidis is equipped with a giant adhesive protein, extracellular matrix-binding protein (Embp), which facilitates bacterial interactions with surface-deposited, but not soluble fibronectin. The structural basis behind this selective binding process has remained obscure. Using a suite of single-cell and single-molecule analysis techniques, we show that S. epidermidis is capable of such distinction because Embp binds specifically to fibrillated fibronectin on surfaces, while ignoring globular fibronectin in solution. S. epidermidis adherence is critically dependent on multivalent interactions involving 50 fibronectin-binding repeats of Embp. This unusual, Velcro-like interaction proved critical for colonization of surfaces under high flow, making this newly identified attachment mechanism particularly relevant for colonization of intravascular devices, such as prosthetic heart valves or vascular grafts. Other biofilm-forming pathogens, such as Staphylococcus aureus, express homologs of Embp and likely deploy the same mechanism for surface colonization. Our results may open for a novel direction in efforts to combat devastating, biofilm-associated infections, as the development of implant materials that steer the conformation of adsorbed proteins is a much more manageable task than avoiding protein adsorption altogether.

A usually harmless bacterium called Staphylococcus epidermidis lives on human skin. Sometimes it makes its way into the bloodstream through a cut or surgical procedure, but it rarely causes blood infections. It can, however, cause severe infections when it attaches to the surface of a medical implant like a pacemaker or an artificial replacement joint. It does this by forming a colony of bacteria on the implant's surface called a biofilm, which protects the bacteria from destruction by the immune system or antibiotics. Understanding how Staphylococcus epidermidis implant infections start is critical to preventing them. This information may help scientists develop infection-resistant implants or new treatments for implant infections. Scientists suspect that Staphylococcus epidermidis attaches to implants by binding to a human protein called fibronectin, which coats medical implants in the human body. Another protein on the surface of the bacteria, called Embp, facilitates the connection. But why the bacteria attach to fibronectin on implants, and not fibronectin molecules in the bloodstream, is unclear. Now, Khan, Aslan et al. show that Embp forms a Velcro-like bond with fibronectin on the surface of implants. In the experiments, Khan and Aslan et al. used powerful microscopes to create 3-dimensional images of the interactions between Embp and fibronectin. The experiments showed that Embp's attachment site is hidden on the globe-shaped form of fibronectin circulating in the blood. But when fibronectin covers an implant surface, it forms a fibrous network, and Embp can attach to it with up to 50 Velcro-like individual connections. These many weak connections form a strong bond that withstands the force of blood pumping past. The experiments show that the fibrous coating of fibronectin on implants makes them a hotspot for Staphylococcus epidermidis infections. Finding ways to block Embp from attaching to fibronectin on implants, or altering the form fibronectin takes on implants, may help prevent these infections. Many bacteria that form biofilms have an Embp-like protein. As a result, these discoveries may also help scientists develop prevention or treatment strategies for other bacterial biofilm infections.

Aptamer-Targeted Drug Delivery for Staphylococcus aureus Biofilm.

Treatment of Staphylococcus aureus biofilm infections using conventional antibiotic therapy is challenging as only doses that are sublethal to the biofilm can be administered safely to patients. A potential solution to this challenge is targeted drug delivery. In this study, we tailored an aptamer-targeted liposomal drug delivery system for accumulation and delivery of antibiotics locally in S. aureus biofilm. In our search for a suitable targeting ligand, we identified six DNA aptamers that bound to S. aureus cells in biofilms, and we demonstrated that one of these aptamers could facilitate accumulation of liposomes around S. aureus cells inside the biofilm. Aptamer-targeted liposomes encapsulating a combination of vancomycin and rifampicin were able to eradicate S. aureus biofilm upon 24 h of treatment in vitro. Our results point to that aptamer-targeted drug delivery of antibiotics is a potential new strategy for treatment of S. aureus biofilm infections.